Products http://www.wojunep.com/PRODUCTS/ zh-cn Rss Generator By 常州网络公司:双喜常州网站建设 1-71-6-52-5-6 Step ring http://www.wojunep.com/Step-ring/83.html The side end of the step ring packing is increased by flanging, which can not only increase the mechanical strength of the packing ring, but also increase the directional probability of the packing when it is put because of the destruction of the symmetry of the packing structure.

未标题-1.png

]]> Conjugate ring http://www.wojunep.com/Conjugate-ring/82.html Conjugate ring combines the advantages of ring and saddle packing, adopts conjugate curve fin structure, both ends of the outer fringed and appropriate length-diameter ratio, between the packing or the packing and the tower wall are point contact, no overlapping. The pores are uniform, the resistance is small, and the directional arrangement is taken when the pile is disorderly, so it has regular packing and characteristics. It has good fluid mechanics and mass transfer properties. It can be made of plastic, metal and ceramic.


]]> Intalox Saddle Ring http://www.wojunep.com/Intalox-Saddle-Ring/81.html Intalox saddle ring, as its name says, the shape is similar to the saddle, but its shapes is between the ring and saddle. This design make full use of the advantage of ring and saddle. It can not only benefit for the liquid distribution, it can also improve the flux of gas. Compared with pall ring, it has larger flux, less resistance and higher efficiency. Additional, it has high rigid and mechanical strength, it is the most widely used type among all the random packing.

]]> Plastic Pall Ring http://www.wojunep.com/Plastic-Pall-Ring/80.html Plastic pall ring is more and more popular in the gas and liquid separator applications. The plastic pall ring has outstanding chemical resistance, temperature stability and mechanical strength. The plastic pall ring consists of polypropylene pall ring, polyethylene pall ring, RPP pall ring, PVDF pall ring, PVC and CPVC pall ring.

]]> Metal Pall Ring http://www.wojunep.com/Metal-Pall-Ring/79.html Metal pall ring is an important type of pall ring. Compared with plastic pall ring, the metal pall ring has better corrosion and rust resistance to be used in the extremely harsh environments. Metal pall ring is mainly made of carbon steel, galvanized steel, stainless steel and other materials. Stainless steel pall ring is the most popular and widely used type because of the best corrosion resistance and chemical stability performance.


]]> Titanium wire mesh packing http://www.wojunep.com/Titanium-wire-mesh-packing/78.html Wire mesh packing is the main form of mesh corrugated packing, which is made of metal wire mesh.

 In chemical engineering, packing refers to the inert solid material contained in a filling tower. In the polymer chemical industry, fillers are the largest amount of additives, and almost all plastics (including thermoplastic and thermosetting plastics), natural rubber and coatings use a large number of fillers.


]]> Stainless steel wire mesh packing http://www.wojunep.com/Stainless-steel-wire-mesh-packing/77.html Stainless steel wire mesh packing

Product name: Wire mesh corrugated packing

Product material: stainless steel wire copper wire low carbon steel wire nickel wire aluminum wire pure titanium other special materials can be customized according to user requirements.

Specifications/types/parameters: e.g. W700(CY) W500(BX) etc.

Ripple tilt direction: X (representing the ripple and tower axis tilt 30°) Y (representing the ripple and tower axis tilt 45°) X packing pressure drop is small; Y-type packing has better mass transfer performance production process: it is composed of a number of corrugated wire mesh sheets in parallel, corrugated sheet inclination of 30° or 45°, and adjacent two corrugated sheets in the opposite direction composed of disc-shaped packing. When filling in the tower, the upper and lower plates are stacked 90°.

]]> Stainless steel orifice packing http://www.wojunep.com/2/76.html Corrugated metal plate packing is one of the main forms of corrugated metal plate packing. The height of the ripple peak and the inclination Angle of the tower axis are divided into Y and X models according to 45° and 30°. The metal orifice corrugated packing retains the structural characteristics of the metal wire mesh corrugated packing, and uses the orifice plate with grooves on the surface, which increases the liquid distribution and the wettability of the packing, and improves the mass transfer efficiency. Each disc unit is 50-200mm in height and more than 1.5m in diameter, and the packing is made into a block form.


]]> Stainless steel structured packing http://www.wojunep.com/Stainless-steel-structured-packing/75.html Structured packing is a kind of packing which is arranged in a uniform geometric pattern in the tower and stacked neatly. Because of the advantages of large specific surface area, small pressure drop, uniform fluid division and high efficiency of mass and heat transfer, it has been widely used. The first developed is metal structured packing, and later developed plastic structured packing, ceramic structured packing and carbon fiber structured packing.


]]> Rectangular wire mesh demister http://www.wojunep.com/Rectangular-wire-mesh-demister/74.html Rectangular wire mesh demister


]]> Wave type wire mesh demister http://www.wojunep.com/Wave-type-wire-mesh-demister/73.html Drawer type waveform (diversion type) mesh demister

Also known as: waveform mesh demister / wavy mesh demister / Drawer type undulating mesh demister


]]> Allotype wire mesh demister http://www.wojunep.com/Allotype-wire-mesh-demister/72.html

 Allotype wire mesh demister

The mesh demister is mainly composed of a mesh, a mesh grid composed of a mesh block and a fixed mesh block supporting device, the mesh is a variety of materials of the gas-liquid filter, the gas-liquid filter is composed of metal wire or non-metallic wire. The non-metal wire of the gas-liquid filter is made of multiple strands of non-metal fiber twisting, which can also be a single strand of non-metal wire such as PP polypropylene and PTFE polytetrafluoroethylene engineering plastics, and can also be mixed type gas-liquid filter such as metal and polypropylene or polytetrafluoroethylene engineering plastics mixed, metal and various fiber lines mixed.


]]> Drawer type wire mesh demister http://www.wojunep.com/Drawer-type-wire-mesh-demister/71.html Drawer type wire mesh demister

 

The drawer type HG/T21586-1998 Demister is mainly composed of a rectangular strip mesh block composed of a mesh screen and a mesh grid instead of the original round mesh block. When used, only 1~N disassembly ports need to be set outside the tower body, and the strip mesh block can be directly inserted along the guide rail (withdrawn during maintenance).

 


]]> Glass fiber mesh demister http://www.wojunep.com/6/70.html Glass fiber mesh demister

Product name: Glass fiber mesh demister/Glass fiber mesh demister/Glass fiber mixed wire mesh trap/glass fiber mixed demister/Glass fiber mixed fog trap

Product type: Standard (SP). High Efficiency (DP) High Penetration (HP)

Specifications: Diameter: 300-6400mm

Thickness: 100-500mm

Nominal diameter: 500-9000mm

Mesh foam remover type: top type (S). Bottom type (X)

Note: There are special specifications to provide drawings, our factory can customize production.


]]> Nickel wire mesh demister http://www.wojunep.com/Nickel-wire-mesh-demister/69.html Nickel wire mesh foam remover / Nickel demister /N6 Wire mesh demister/Nickel wire mesh foam catcher

Mesh demister is divided into: (S top type), (X bottom type) and non-standard mesh demister.

Mesh demister specifications: DN6600-100mm, DN1100-150mm, DN3400-200mm, 750*1580*60mm, 450*1180*100mm, etc., manufacturers can customize the production of a variety of different specifications of the demister.

 


]]> Titanium wire mesh demister http://www.wojunep.com/Titanium-wire-mesh-demister/68.html Titanium wire mesh demister

]]> PTFE wire mesh demister http://www.wojunep.com/PTFE-wire-mesh-demister/67.html Polytetrafluoroethylene (PTFE) F4 wire mesh demister


]]> PP wire mesh demister http://www.wojunep.com/PP-wire-mesh-demister/66.html Product name: Polypropylene mesh demister PP mesh demister Plastic mesh demister Wire mesh trap Wire mesh demister



]]> SS wire mesh demister http://www.wojunep.com/SS-wire-mesh-demister/65.html Product name: Stainless steel wire mesh demister / 304 Wire mesh demister / 316L wire mesh demister / Air mist separation wire mesh demister / 321 wire mesh demister / Stainless steel mesh demister

Product material: 201 304 304A 304L 321 316L 2205, etc

Product Specifications:

Diameter: DN300-6400mm

Thickness: 100-500mm


]]> Stainless steel wire mesh demister http://www.wojunep.com/Demister/46.html With valuable experiences and devoted workers, we can fabricate demister pads from hand size to 16 meters (our record till now) in diameter. Also we can make the mesh pads into any shape and thickness as per customer request. No problem with vary densities for different applications.

]]>